Kitchen cabinets · North Scottsdale
Kitchen Cabinets in North Scottsdale, AZ
North Scottsdale's boom ran through the 1990s and 2000s, so many kitchens up here may still run their first set of cabinets. This page covers both paths, refacing and replacement, and the published numbers; for your own kitchen, call (747) 244-3289.
- Last updated
01Cabinets
Do North Scottsdale's 1990s kitchens need new cabinets or just refacing?
Often less than owners expect. Cabinet boxes installed around DC Ranch, Grayhawk and Troon during the 1990s and 2000s are often still square, and a sound box is the main requirement for refacing. What ages first is often the moving hardware: hinges, glides and shelf supports can wear after 25 years of daily use. Open floor plans were common in that era, so remodels here often center on the cabinets, counters, islands and lighting instead of on taking out walls. Replace when the layout is the problem, the boxes are damaged, or the storage no longer fits the household. Reface when the footprint works and the doors, drawer fronts and finish are what date the room. The sections below price both routes.
02Costs
What do new cabinets cost in North Scottsdale?
Kitchen cabinets come in 3 price tiers: Fixr's 2026 guide lists stock cabinets at $100 to $300 per linear foot, semi-custom at $150 to $650, and custom at $500 to $1,200, with installation running $4,000 to $14,000 and a national average of $7,000. Homes around DC Ranch, Grayhawk and Troon can land in the middle and upper tiers, because long walls, tall ceilings and odd corners push orders toward made-to-measure sizes. Storage moves the number: pull-out shelves, a tall pantry run and deep pot drawers add cost, while keeping the existing footprint holds it down. The actual price is set after an on-site assessment, so treat the figures above as calibration for the first conversation.
03Cabinets
Is refacing the smarter spend on a 25-year-old box?
On a sound box, it often is. A national cost survey's 2026 figures put cabinet refacing at $4,234 to $10,226, averaging $7,230, and that covers new doors, drawer fronts and veneer on the exposed frame while the boxes, the plumbing and the counter layout stay put. Quality is the variable worth managing: the Kitchen Cabinet Manufacturers Association says certified cabinets pass 14 tests, among them a 600-pound load test, to simulate a lifetime of use (KCMA (opens in a new tab)). To sort refacing from replacement for your house, call (747) 244-3289.
04Cabinets
How does a cabinet project move from measurement to installation?
In a fixed order, and the order is what keeps it sane. The room is measured and the walls, the floor and the existing utilities are checked; the cabinet order goes in only after those numbers are confirmed, because later changes get expensive. Scottsdale's home improvement guidance (City of Scottsdale (opens in a new tab)) treats cabinets and similar millwork as work that generally does not need a permit, while electrical, plumbing and demolition each can require a minimum permit, and a permit's first inspection must happen within 180 days or it expires. Installation is often the shortest large block of the job, and the kitchen is out of service while it runs. If the order includes lighting or a new island, the trades get sequenced so they do not crowd one doorway.
054 questions
Questions people ask
Still have a question?
Call and describe the kitchen. Calls are answered day and night.
Call (747) 244-328901Can the old counters stay when the cabinets are replaced?
Sometimes. Removing cabinets puts the counter run at risk even when the stone looks fine, and the sink and cooktop cutouts must line up with the new boxes. A counter that comes off cleanly can usually go back on. Weighing both outcomes keeps the decision open.
02Which cabinet tier fits a Grayhawk or DC Ranch kitchen?
Semi-custom often fits kitchens in those neighborhoods. These lines offer more sizes, door styles and finishes than stock, which matters when the room is long or the ceilings are tall, without the made-to-measure price of custom. Straightforward kitchens can still work with stock sizes.
03Is a permit needed for cabinet work in 85255 or 85262?
For cabinets and millwork alone, Scottsdale's guidance generally says no. If a project also moves electrical, plumbing or a wall, parts of that scope can require a minimum permit and plan review. The city decides.
04Can a casita kitchen be part of the same cabinet order?
Yes, mention the second kitchen when you call. Casitas with their own kitchens appear on some of the larger lots here, and one cabinet order for both rooms keeps delivery and schedule together.
06Keep reading
Related
- Kitchen cabinets in Scottsdale: the main cabinets page, stock sizes through custom and refacing.
- Kitchen remodeling in North Scottsdale: projects across DC Ranch, Grayhawk, Troon and the preserve edge.
- Kitchen countertops in North Scottsdale: pairing a cabinet change with the right surface.
- What a kitchen remodel costs in Scottsdale: published ranges for every part of the job, sources named.
- All service areas: Scottsdale and the communities around it.
